• Alkycontrol Methanol Injection kits for the C5, C6 and C7 Corvette platforms.
    Each kit is vehicle specific and will not fit any other application without major modifications. Instructions, tip sheets, and tech support is included. 1000's of these kit have been sold. Will support 650 RWHP on a single. Twin nozzle upgrades available to increase delivery and support more power. Over 1000 RWHP has been seen on 93 Octane pump gas and this kit running straight methanol 0n LS  and LT based motors.

    -

  • This is the balancer that comes standard in all our C7 Supercharger systems. CNC machined to run straight and true. Available in 8 or 10 rib configurations.

    -

  • We offer our proprietary harmonic balancers manufactured by Innovators West.

    Standard Option:

    • 8 RIB

    -

  • FLOWS  127# @ 4 BAR -  OUR MOST POULAR E85 INJECTOR! *

    These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.

    Tuning data for all our injectors is available on our website under “Tech”.

    -

  • The A&A C6 intercooler is the only one on the market that allows 100% of the core to be open to incoming airflow.

    -

  • C5 is a “Bottom Breather”. Incoming airflow is drawn in from under the car, rather than through a large grille opening as in later models. This requires a different approach as to how to get adequate airflow through the intercooler.

    Enclosure available separately

    Discounted price good only when purchased with intercooler

    -

  • We’re taking air from the high pressure radiator cavity and forcing it through the intercooler and out into the low pressure area under the car. Looking through the grille, you’ll only see the scoop protruding into the airflow.

    -

    • Our mounting bracket/tensioner assembly is state of the art
    • Unsurpassed belt wrap on the supercharger pulley
    • Unsurpassed belt wrap on the crankshaft pulley
    • Standard Polished Finish
    • Standard Fitment Vortech Head Units

    -

    • Our mounting bracket / tensioner assembly is state of the art.
    • Unsurpassed belt wrap on the supercharger pulley
    • Unsurpassed belt wrap on the crankshaft pulley as well
    • Standard Polished Finish
    • Standard Fitment - Vortech Head Units

    -

    • Our mounting bracket/tensioner assembly is state of the art
    • Unsurpassed belt wrap on the supercharger pulley
    • Unsurpassed belt wrap on the crankshaft pulley
    • Standard Polished Finish

    -

  • This complete drive system is a combination of our mounting bracket with adjustable billet tensioner and our Secondary Drive. Buying the combination together allows us to offer you a discount price. Our Secondary Drive has been updated with a larger transfer pulley to slow the bearing speed. We are also including a GRIPTEC transfer pulley. Both these modifications help eliminate belt slip without having to run the transfer pulley belt so tight.

    -

  • While this is our entry level head unit, it is also the most efficient head unit for stock engines in the 500 – 600 RWHP range.  The Si is also the only head unit that can be used in our CARB compliant kits.

    Standard Features:
    • Polished
    • V2 – Pressure Lubed from the Engines Oil System – Helical Cut Gears

    -

  • Performance Specs
    • Internal Step-Up Ratio: 3.61:1
    • V3 Max Speed: 52,000 RPM
    • V1 and V2 Max Speed 56,000 RPM
    • Max Boost: 22 PSI
    • Max Flow: 1,250 CFM
    • Max Power: 900
    • HP Peak Efficiency: 78%
    Standard Features
    • Polished  Finish
    • V3- Self -contained oiling- Helical Cut Gears
    • V2 Pressure Lubed From The Engines Oil System- Helical cut gears
    •  V1 - Pressure Lubed From The Engines Oil System- Straight cut gears

    -

  • Standard Features:
    • Polished Finish

    -

  • Standard Features
    • The Best Drive System in the Business- BAR NONE!
    • Adjustable Billet Tensioner with Lockout Mechanism
    • Polished Finish
    • Ram Air Intercooler Design
    • V3 Si Head Unit
    • 38MM Turbosmart BOV
    • 60# Bosch Injectors
    • Vortech MaxFlow Fuel Pump Booster (optional Racetronix Plug N Play hotwire harness is HIGHLY recommended)
    Select options or upgrades

    -

  • Standard Features
    • Best Belt Drive System in the Business- Bar NONE!
    • Polished Head unit, mounting Bracket and Tubing.
    • V3 Si Head Unit
    • 38MM Turbosmart BOV
    • 4.00" Pulley
    • 7.65" Balancer (please call for combinations if not listed as an option below)
    • 8 Rib Dedicated Belt Drive System
    Select options or upgrades

    -

  • Standard Features

    • Polished Head Unit, Brackets and Tubing
    • V3 Si Head Unit-Self Contained
    • Proprietary Ram Air Intercooler Design
    • Robust Mounting Bracket with Adjustable Billet Tensioner
    • 38MM Turbosmart BOV with Filter
    • 60# Siemens Deka Injectors
    •  Vortech MaxFlow Fuel Pump Booster
    • Pre-Gapped NGK Spark Plugs
    Select options or upgrades

    -

Go to Top