Kenne Bell Boost-A-Pump

Kenne Bell Boost-A-Pump


The Kenne Bell Boost A Pump is the simplest way to increase fuel capacity from stock or aftermarket pumps.

For more aggressive setups we suggest adding the Boost A Pump to our standard in tank pump. Under boost conditions, only, the Boost A Pump jumps the voltage up to a maximum of 17.5 volts. This in turn delivers more fuel.  Late models (2003 and up) will need to use the BAP in place of the in- tank pump.

SKU: KP-BAP Category:


It activates only under boost, so it doesn’t “bloat” or “overload” the fuel system at idle or cruise where full time pumps and extra fuel are not required. So, the fuel isn’t heated (gasoline begins to boil at 95°). No “cool can” is necessary. And it’s much easier to install (cut one wire) and more reliable than fuel pumps.


  • Increases fuel pump flow up to 50% on ANY electric pump(s).
  • Easily installed. Uses stock feed wire & fuel lines.
  • Eliminates expensive fuel lines and pump upgrades.
  • Exclusive built in regulator stabilizes voltage regardless of battery voltage (down to 11V).
  • Compensates for reduced voltage/pump delivery from voltage drops by lights and accessories.
  • Proven reliability and concept. Tens of thousands sold since 1995.
  • Standard on all our Late C5 and C6 Supercharger systems. Does not affect pump life.
  • Activated by boost switch (supercharged, turbocharged) or vacuum switch (naturally aspirated).
  • Ideal for Nitrous applications.
  • Fused circuit protection.
  • Attractive anodized red aluminum.
  • Easily installed.

Additional information

Weight 5 lbs
Dimensions 7 × 5 × 4 in