C6 80# New Bosch Injector for LS2

Back to Shop:C6 80# New Bosch Injector for LS2

C6 80# New Bosch Injector for LS2


FLOWS 850 CC @3BAR and 980 CC @4 BAR fuel pressure*

These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.

Tuning data for all our injectors is available on our website under “Tech”.

SKU: FIC80LS2 Category:


*Standard injector test pressure, for comparison purposes, is 3 BAR or 43.5 PSI fuel pressure. The GM LSX platform runs at 4 BAR or 58 PSI fuel pressure. The 4 BAR flow rate is the actual flow rate of all listed injectors when used in a GM LSX type application. Make sure, when comparing injectors, that you are comparing at the same fuel pressure.

Additional information

Weight 2 lbs
Dimensions 7 × 5 × 4 in