-
- THE BEST DRIVE SYSTEM IN THE BUSINESS- BAR NONE!
- UPGRADED V3-Ti HEAD UNIT WITH BILLET IMPELLER
- A&A'S EXCLUSIVE BILLET TENSIONER WITH LOCKING MECHANISM
- UPGRADE TO 80#BOSCH INJECTORS
- A&A SINGLE PUMP FULL RETURN STYLE FUEL SYSTEM
- A&A 50mm RACEPORT BLOWOFF VALVE
-
NEW PRODUCT!
For standard or Methanol injected C5 and C6
The thin plastic MAF sensor used on 2001 - 2007 Corvettes is thermo-welded together and can actually come apart under high boost situations. This requires the purchase of a new one.
The A&A MAF Girdle will repair and reinforce the plastic MAF sensor. It bolts and permanently locks the two halves together, so it can never happen again.
The standard version is used without Methanol Injection while our new extended version allows you to place a Methanol Injection nozzle and IAT (Inlet Air Temperature) sensor downstream of the MAF sensor where it belongs. Besides saving or preventing a broken MAF, it's a strong, clean solution to the nozzle placement problem.
- Length - Standard
- Polished Finish - Standard
-
FLOWS 127# @ 4 BAR - OUR MOST POULAR E85 INJECTOR! *
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
-
FLOWS 1000CC @3BAR and 1200 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
-
FLOWS 1000CC @3BAR and 1200 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
-
FLOWS 850 CC @3BAR and 980 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
-
FLOWS 850 CC @3BAR and 980 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
-
FLOWS 750 CC @3BAR and 923 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
-
FLOWS 650 CC @3BAR and 866 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
-
FLOWS 650 CC @3BAR and 866 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
