A&A supercharger pulleys are machined to exacting tolerances with a groove profile designed to provide maximum belt grip.
We also offer our smaller 8 and 10 rib pulleys with a cross-cut pattern to further enhance grip in high horsepower applications.
A&A filters are manufactured using a high flow washable, reusable cotton filter medium. Each filter is designed for maximum airflow in the limited space available.
A&A supercharger pulleys are machined to exacting tolerances with a groove profile designed to provide maximum belt grip.
We also offer our 6 and 10 rib pulleys with a cross-cut pattern to further enhance grip in high horsepower applications.
Standard Features
A&A supercharger pulleys are machined to exacting tolerances with a groove profile designed to provide maximum belt grip.
We also offer our 10 rib pulleys with a cross-cut pattern to further enhance grip in high horsepower applications.
The 52MM Big Bubba looks like our standard 38MM valve on steroids. The huge bore allows the piston to react to boost and vacuum changes much more quickly as well as increasing the airflow capacity exponentially.
We recommend this valve for our highest horsepower street and race application.
Standard feature
C5 (LS1 AND LS6 STYLE) INJECTORS
FLOWS 650 CC @3BAR and 866 CC @4 BAR fuel pressure*
These are new Siemens Deka injectors that fit with no adapters or wire harnesses. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
FLOWS 1000CC @3BAR and 1200 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
C5 (LS1 AND LS6 STYLE) INJECTORS
FLOWS 890 CC @3BAR and 1000 CC @4 BAR fuel pressure*
These are new Siemens Deka injectors that fit with no adapters or wire harnesses. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
For standard or Methanol injected C5 and C6
The thin plastic MAF sensor used on 2001 - 2007 Corvettes is thermo-welded together and can actually come apart under high boost situations. This requires the purchase of a new one.
The A&A MAF Girdle will repair and reinforce the plastic MAF sensor. It bolts and permanently locks the two halves together, so it can never happen again.
The standard version is used without Methanol Injection while our new extended version allows you to place a Methanol Injection nozzle and IAT (Inlet Air Temperature) sensor downstream of the MAF sensor where it belongs. Besides saving or preventing a broken MAF, it's a strong, clean solution to the nozzle placement problem.
FLOWS 850 CC @3BAR and 980 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
Our Blowoff Valves are manufactured by Turbosmart of Australia specifically for A&A under a Private Label agreement.
The Race Port is famous for being an amazingly small and light BOV for supercharged competition level engines. Featuring our unique collar design and internal flow structures, it is 50% lighter and 25% smaller than the competition while flowing 330 CFM - making it the highest flowing BOV of its type on the market.
C5 (LS1 AND LS6 STYLE) INJECTORS
MODIFIED WITH BILLET SPRAY TIP
FLOWS 1000CC @3BAR and 1200 CC @4 BAR fuel pressure*
These are new Siemens Deka injectors that fit with no adapters or wire harnesses. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
This tube connects the intercooler to the throttle body. Our C6 MAF tubes are 4"mandrel bent aluminum with bead rolled ends for positive hose retention. Available in polished or satin black powder coat.
Standard Option
Speed Density Options
FLOWS 650 CC @3BAR and 866 CC @4 BAR fuel pressure*
These are direct fit Bosch injectors no adapters or wire harnesses needed. These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on our website under “Tech”.
