Shop

Shop
  • Made specifically for A&A by Turbosmart, this is our quietest valve and recommended only for stock vehicles making less than 600 RWHP. Includes a 2” aluminum nipple with a hose bead that is V Band clamped to the valve.

  • Our Blowoff Valves are manufactured by Turbosmart of Australia specifically for A&A under a Private Label agreement.

    The Race Port is famous for being an amazingly small and light BOV for supercharged competition level engines. Featuring our unique collar design and internal flow structures, it is 50% lighter and 25% smaller than the competition while flowing 330 CFM - making it the highest flowing BOV of its type on the market.

  • The 52MM Big Bubba looks like our standard 38MM valve on steroids. The huge bore allows the piston to react to boost and vacuum changes much more quickly as well as increasing the airflow capacity exponentially.

    We recommend this valve for our highest horsepower street and race application.

    Standard feature
    • Single Outlet Filter
  • C5 is a “Bottom Breather”. Incoming airflow is drawn in from under the car, rather than through a large grille opening as in later models. This requires a different approach as to how to get adequate airflow through the intercooler.

    Enclosure available separately

    Discounted price good only when purchased with intercooler

  • Standard Features

    • Polished Finish
    • V3 Si Head Unit
    • 38MM Turbosmart with Filter Standard Blowoff Valve
    • 60# Siemens Deka Standard Injector
    • Standard Belt Drive System 6 Rib
    Select options or upgrades
  • We designed this High- Performance Radiator specifically to work with our supercharger systems. We then commissioned Griffin Thermal Products to produce them for us. 

    Our radiator features a full 2.5” thick core vs. 1” on the factory radiator. The fin count is also optimized for maximum cooling.

    For manual transmission only.

    • Our mounting bracket/tensioner assembly is state of the art
    • Unsurpassed belt wrap on the supercharger pulley
    • Unsurpassed belt wrap on the crackshaft pulley
    • Standard Polished Finish
    • Standard Fitment Vortech Head Units
  • The A&A C6 intercooler is the only one on the market that allows 100% of the core to be open to incoming airflow.
  • Standard Features
    • Polished Finish
    • V3 Si Head Unit
    • Wet Sump Oiling System
    • 38MM Turbosmart Blowout Valve with Filter
    • 60# Siemens Deka Injectors
    • 6 Rib
    Select options or upgrades
  • We designed this High-Performance Radiator specifically to work with our supercharger systems. We then commissioned Griffin Thermal Products to produce them for us. 

    Our radiator features a full 3” thick core vs. 1” on the base C6, and 1.4” on the Z51 or Z06. The fin count is also optimized for maximum cooling.

    Comes with internal transmission and engine oil coolers using factory fittings. Factory Z06 oil cooler lines will plug right into our radiator.

    Fits all C6 Corvettes including base models, Z51 and Z06 except ZR1 and some late Z06 models using ZR1 style cooling.

    • Our mounting bracket / tensioner assembly is state of the art.
    • Unsurpassed belt wrap on the supercharger pulley
    • Unsurpassed belt wrap on the crankshaft pulley as well
    • Standard Polished Finish
    • Standard Fitment - Vortech Head Units
    • Our mounting bracket/tensioner assembly is state of the art
    • Unsurpassed belt wrap on the supercharger pulley
    • Unsurpassed belt wrap on the crackshaft pulley
    • Standard Polished Finish
  • Standard Features
    • Polished Finish
    • V3 Si Head Unit
    • 38MM Turbosmart Blowoff Valve with Filter
    • 4.00" Pulley
    • 7.65" Balancer (please call for combinations if not listed as a option below)
    • 8 Rib Belt Drive System
    Select options or upgrades
  • We’re taking air from the high pressure radiator cavity and forcing it through the intercooler and out into the low pressure area under the car. Looking through the grille, you’ll only see the scoop protruding into the airflow.
    • Our mounting bracket/tensioner assembly is state of the art
    • Unsurpassed belt wrap on the supercharger pulley
    • Unsurpassed belt wrap on the crackshaft pulley
    • Standard Polished Finish
  • A&A filters are manufactured using a high flow washable, reusable cotton filter medium. Each filter is designed for maximum airflow in the limited space available.

  • NEW PRODUCT!

    For standard or Methanol injected C5 and C6

    The thin plastic MAF housing used on 2001 - 2007 Corvettes is glued together and often comes apart, requiring the purchase of a new one. The A&A MAF Girdle will repair and reinforce the plastic MAF sensor. It bolts and permanently locks the two halves together, so it can never happen again.

    The standard version and is used without Methanol Injection while our new extended version allows you to place a Methanol Injection nozzle and IAT (Inlet Air Temperature) sensor upstream of the MAF sensor where it belongs. Besides saving or preventing a broken MAF, it's a strong, clean solution to the nozzle placement problem.

    • Length - Standard
    • Polished Finish - Standard
  • Fits C5 and C6 Corvette

    Dealer pricing includes balancer
  • This complete drive system is a combination of our mounting bracket with adjustable billet tensioner and our Secondary Drive. Buying the combination together allows us to offer you a discount price.
  • Alkycontrol Methanol Injection kits for the C5, C6 and C7 Corvette platforms.
    Each kit is vehicle specific and will not fit any other application without major modifications. Instructions, tip sheets, and tech support is included. 1000's of these kit have been sold. Will support 650 RWHP on a single. Twin nozzle upgrades available to increase delivery and support more power. Over 1000 RWHP has been made on 93 Octane pump gas and this kit running straight methanol 0n LS  and LT based motors.
  • 10 Rib Cross-cut - 2.70"

    A&A supercharger pulleys are machined to exacting tolerances with a groove profile designed to provide maximum belt grip. 

    We also offer our 6 and 8 rib pulleys with a cross-cut pattern to further enhance grip in high horsepower applications.

  • A&A supercharger pulleys are machined to exacting tolerances with a groove profile designed to provide maximum belt grip. 

    We also offer our smaller 8 and 10 rib pulleys with a cross-cut pattern to further enhance grip in high horsepower applications.